Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons page 31

Removing a SIMM
If you wish to install an upgrade in a SIMM socket which is
already occupied you must first remove the existing SIMM.
1. Lever the metal clips on each side of the socket
gently away from the SIMM using your forefingers.
2. Place your thumbs on the top edge of the SIMM and
move it gently towards the vertical.
3. When the SIMM has rotated through 20°, taking care
to avoid touching any of the components on the
SIMM, grip the top corners of the SIMM between
thumb and first finger and carefully pull the SIMM out
of the socket.
29