Table of Contents
Advertisement
6. Position the expansion card alongside the slot in
which you wish to install it. Align the rear of the card
with the slot in the rear of the system unit, and, if the
card is full length, the front of the card with the card
guide.
Note
If the card uses the video feature connector on the
motherboard, you must plug the video feature cable
into the motherboard socket before you install the
card.
7. Slide the card into the slot ensuring that the card
edge connector engages correctly with the
expansion card connector.
8. Carefully push the card fully home. Do not apply
excessive pressure.
9. Secure the card by replacing the screw that you
removed in step 4.
10. Connect any signal cables to the card.
11. Replace the system unit cover.
25
Advertisement
Table of Contents
