Change Disk Types - Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons

Change disk types

Hard 1
None
Autodetect
User-defined
Hard 2
None
Autodetect
User-defined
Hard 1 and 2
For Apricot supplied drives always use Autodetect. This
will ensure that the system uses the correct parameters for
the drive.
The user-defined entry is for possible future enhancement
to allow non-standard drives to be used.
Floppy 1 and 2
These two option groups allow to select which type of
floppy drive is installed.
Floppy 1 will always be a 3.5" device, 1.44M being the
standard fitment.
Floppy 2, if fitted, will usually be a 5.25" 1.2M device.
The other options are included for compatibility reasons,
and for possible future enhancement.
Change disk types
Floppy 1
3.5" 720K
None
3.5" 1.44M
5.25" 360K
3.5" 2.88M
5.25" 1.2M
Floppy 2
3.5" 720K
None
3.5" 1.44M
5.25" 360K
3.5" 2.88M
5.25" 1.2M
Save
Cancel
Default
13