Usb Device Accessories, Usb Cable, And Power Supply; 37-Pin M Series Cables And Accessories - National Instruments M Series User Manual

Chapter 2 DAQ System Overview
For more information on the connectors used for DAQ devices, refer to the NI DAQ Device
Custom Cables, Replacement Connectors, and Screws document by going to
and entering the Info Code
rdspmb

USB Device Accessories, USB Cable, and Power Supply

USB Screw Terminal and USB Mass Termination devices feature connectivity directly on the
device and do not require an accessory for interfacing to signals. However, NI offers a variety
of products to use with the USB M Series devices, as shown in Table 2-2.
Table 2-2. USB Device Cabling, Accessories, and Power Supply
Description
NI USB DAQ Power Supply
Externally Powered USB M Series Panel
*
Mounting Kit
USB cable with locking screw, 2 m
BNC Male (Plug) to BNC Male (Plug) Cable
* Not for use with NI USB BNC devices.

37-Pin M Series Cables and Accessories

This section describes some cable and accessory options for the PCI-6221 (37-pin) device. Refer
to the following sections for descriptions of these cables and accessories. Refer to
other accessory options.
Table 2-3. PCI-6221 (37-Pin) Cables and Accessories
Cables and Accessories Type
Cables Shielded
Unshielded
Accessories Unshielded Screw Terminal Block
Custom Connectivity
2-8 | ni.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
.
Part Number
Supported Models for
PCI-6221 (37-Pin) Device
SH37F-37M
SH37F-P-4
R37F-37M
CB-37F-HVD
CB-37FV
CB-37FH
CB-37F-LP
TB-37F-37SC
TB-37F-37CP
ni.com/info
780046-01
780214-01
780534-01
779697-02
for
ni.com