National Instruments M Series User Manual page 203

Appendix A Module/Device-Specific Information
Table A-22. Default NI-DAQmx Counter/Timer Pins
Counter/Timer Signal
CTR 0 SRC
CTR 0 GATE
CTR 0 AUX
CTR 0 OUT
CTR 0 A
CTR 0 Z
CTR 0 B
CTR 1 SRC
CTR 1 GATE
CTR 1 AUX
CTR 1 OUT
CTR 1 A
CTR 1 Z
CTR 1 B
FREQ OUT
Note For a detailed description of each signal, refer to the
Descriptions
section of Chapter 3,
Note For more information about default NI-DAQmx counter inputs, refer to
Connecting Counter Signals in the NI-DAQmx Help or the LabVIEW Help.
NI PCI/PCIe/PXI/PXIe-6259 Important Links
The following list contains links specific to your DAQ device:
Specifications—Refer to the NI 6259 Specifications for more detailed information about
•
the NI PCI/PCIe/PXI/PXIe-6259 device.
Accessory and Cabling Options—Refer to the
•
DAQ System
section of Chapter 2,
PCI Express Disk Drive Power Connector—Refer to the
•
Connector and LED
of Chapter 3,
A-46 | ni.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default Connector 0 Pin Number (Name)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
2 (PFI 12)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
40 (PFI 13)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
1 (PFI 14)
Connector and LED Information.
68-Pin M Series Cables and Accessories
Overview, for more information.
RTSI Connector Pinout
Information, for more information.
I/O Connector Signal
section