National Instruments M Series User Manual page 175

Appendix A Module/Device-Specific Information
Table A-8. Default NI-DAQmx Counter/Timer Pins
Counter/Timer Signal
CTR 0 SRC
CTR 0 GATE
CTR 0 AUX
CTR 0 OUT
CTR 0 A
CTR 0 Z
CTR 0 B
CTR 1 SRC
CTR 1 GATE
CTR 1 AUX
CTR 1 OUT
CTR 1 A
CTR 1 Z
CTR 1 B
FREQ OUT
Note For a detailed description of each signal, refer to the
Descriptions
section of Chapter 3,
Note For more information about default NI-DAQmx counter inputs, refer to
Connecting Counter Signals in the NI-DAQmx Help or the LabVIEW Help.
USB-6225 Screw Terminal Important Links
The following list contains links specific to your DAQ device:
Specifications—Refer to the NI 6225 Specifications for more detailed information about
•
the USB-6225 Screw Terminal device.
LED Patterns—Refer to the
•
Information, for information about the USB-6225 Screw Terminal LEDs.
Fuse Replacement—Refer to the
•
Getting Started, for information about replacing the fuse on the USB-6225 Screw Terminal.
Accessory Options—Refer to the
•
DAQ System
section of Chapter 2,
A-18 | ni.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default Pin Number (Name)
113 (PFI 8)
115 (PFI 9)
117 (PFI 10)
121 (PFI 12)
113 (PFI 8)
115 (PFI 9)
117 (PFI 10)
108 (PFI 3)
109 (PFI 4)
119 (PFI 11)
123 (PFI 13)
108 (PFI 3)
109 (PFI 4)
119 (PFI 11)
125 (PFI 14)
Connector and LED
LED Patterns
section of Chapter 3,
USB Device Fuse Replacement
USB Device Accessories, USB Cable, and Power Supply
Overview, for more information.
I/O Connector Signal
Information.
Connector and LED
section of Chapter 1,