Honda CX500 1978 Shop Manual page 206

REAR WHEELIBRAKEI
HONDA
FINAL DRIVEISUSPENSION
CX500
Install the swing arm on
holder from the right side.
the pivot bearing
Tighten the pivot bolt gradually.
NOTE
Make sure that the end of the pivot bolt
is inserted into the bearing inner.
Torque the swing arm pivot bolt.
TORQUE SPECIFICATION:
0.8-1.2 kg-m (6-9 ft-lbs)
.
.
Tighten the lock nut.
TORQUE SPECIFICATION:
8.0-12.0 kg-m (58-87 ft-lbs)
y l
, . . u e: January, 1978
OHONDA MOTOR CO., LTD.