Honda CX500 1978 Shop Manual page 34

HONDA
INSPECTION AND ADJUSTMENT
CXSOO
SUSPENSION .+pa
SIDE STAND
Check the rubber pad for deterioration or wear.
FRONT
7
Check the action of the front forks by com-
pressing them several times.
Check the entire fork assembly for signs of
leaks of damage.
Replace any components which are unre-
pairable.
Torque all nuts and bolts.
REAR
Place the motorcycle on a support t o raise the
Replace if any wear extends t o wear line
as
shown.
Check the side stand spring for damage and loss
of tension, and the side stand assembly for
freedom of movement and bend.
the mark "Over
260
Ibs ONLY".
Spring tension is correct if the
measurements fall within
2-3
kg
When pulling the side stand lower end
rear wheel.
Move the rear wheel sideways with force to see
if the swing arm bushings are worn. Replace if
excessively worn.
Inspect the entire suspension assembly to be
sure it is securely mounted and not damaged
or distorted.
-
-
3- 14
Date of Issue: January, 1978
OHONDA MOTOR CO.. LTD.