Honda CX500 1978 Shop Manual page 333

HONDA
C X 5 0 0
'82 ADDENDUM
1
INSPECTION
CALIPER PISTON O.D.
Check each piston for scoring or scratches.
Measure the outside diameter of each piston
with a micrometer.
, -
SERVICE LIMIT: 30.140 mm (1.1866 in)
, -
CALIPER CYLINDER I.D.
Check each caliper cylinder for scoring or
scratches.
Measure the inside diameter of each caliper
cylinder bore.
SERVICE LIMIT: 30.290 mm (1.1925 in)
ASSEMBLY
reduces stopping power. Replace con-
taminated pads, and clean a contami-
nated disc with agood quality degreasing
Assemble the caliper in the reverse order of
disassembly. The oil seals must be replaced I
whenever they are removed.
Lubricate the pistons and seals with a medium
grade of high temperature silicon grease or
brake fluid before assembly.
Make sure the piston seals are seated i n the
caliper grooves.
I
PAD SPRl
bj
COLIAR
Date of Issue: September 1981
@American Honda Motor Co., Inc. 1981
-
All Rights Reserved