Honda CX500 1978 Shop Manual page 184

REAR WHEELIBRAKEI
HONDA
FINAL DRIVEISUSPENSION
CX500
REAR WHEEL ASSEMBLY
Pack all bearing cavities with grease and drive in
the bearing with a bearing driver.
Drive the left (retainer side) bearing first.
NOTE
1
Drive the bearings squarely.
Install the bearing retainer and punch it.
lnstall the distance collar and drive the right
bearing into place.
BEARING DRIVER HANDLE ( A )
BEARING DRIVER OUTER (42
x
47 mm)
BEARING DRIVER PILOT (17 mm)
I
!R WRENC
lnstall the O-ring and lubricate the splines and
O-ring with lithium.based multipurpose grease.
lnstall the final driven flange.
- -
Date of Issue: January, 1978
OHONDA MOTOR CO.,
LTD.