Kirsch Cellular Shade Collection Installation Instructions Manual page 16

Hook the stationary rail bracket in place.
■ ■
Hook the stationary rail bracket to the headrail as illustrated.
➤ ■
Move the stationary rail flush against the jamb.
➤ ■
You may allow the stationary rail to hang freely.
➤ ■
NOTE: To move the stationary rail bracket, pull the bottom of the rail into the room
slightly before sliding the bracket.
Flush
Attach the stationary rail bottom bracket. The bracket may be attached to the sill or
■ ■
floor. It may also be attached to the jamb using the inside mount adaptor.
Be sure the stationary rail is flush against the jamb.
➤ ■
Floor or sill attachment: Attach the stationary rail bottom bracket using the
➤ ■
screw provided.
Jamb attachment: Use the inside mount adaptor to secure the stationary rail to
➤ ■
the side of the jamb.
— Slide the inside mount adaptor onto the stationary rail bottom bracket. Align
the screw hole of the adaptor to face the side jamb (or side wall).
— Secure with the provided screw through the inside mount adaptor and into the
side jamb (or side wall).
NOTE: If you ordered your shade with a cut-out, for baseboards or other
obstructions, you must use the inside mount adaptor.
CAUTION: Use drywall anchors when mounting into drywall.
Floor or Sill Attachment
Stationary
Rail Bottom
Bracket
INSTALLATION
INSTALLATION
Jamb Attachment
Inside Mount
Rail Bottom
Adaptor
15
Stationary
Bracket
Stationary
Rail Bracket
Stationary
Rail
Jamb
Attachment