Nexxis Or; Power Supply Connection - Barco MDSC-2324 Series User Manual

Image 3-8

3.5 Nexxis OR

Overview
Connecting your MDSC-2324 to Barco's Nexxis OR system allows you to distribute video, graphics, audio and
computer data over the IP network, in raw uncompressed format, inside the operating room and even between
surgical suites.
To connect your MDSC-2324 to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-2324 in your network is available
in the dedicated user guides. Please visit
Nexxis OR is only available on the MDSC-2324 MNA version.

3.6 Power supply connection

To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
Image 3-9
CAUTION: To avoid risk of electric shock, the external DC power supply must be connected to a
mains with protective earth. The ground connection on the display's DC power input connector has
no protective earth function. The MDSC-2324 display protective earth connection is provided via a
dedicate pin (see next steps).
3
www.barco.com to obtain these user guides.
K5903252 (451920612633) /02
Display installation
1 2
MDSC-2324 27