Table of Contents
Advertisement
Product overview
2.4.2 DVI-1 connector (DVI-I)
Overview
Image 2-7
1.
D2_Rx- (T.M.D.S.)
2.
D2_Rx+ (T.M.D.S.)
3.
GND (data 2 shield)
4.
Not connected
5.
Not connected
6.
SCL (for DDC)
7.
SDA (for DDC)
8.
Analog vertical sync
9.
D1_Rx- (T.M.D.S.)
10.
D1_Rx+ (T.M.D.S.)
11.
GND (data 1 shield)
12.
Not connected
13.
Not connected
14.
+5V input (DDC supply) (*)
15.
GND (cable sense)
16.
Hot plug detect (*)
17.
D0_Rx- (T.M.D.S.)
18.
D0_Rx+ (T.M.D.S.)
19.
GND (data 0 shield)
20.
Not connected
21.
Not connected
22.
GND (clock shield)
23.
CK_Rx+ (T.M.D.S.)
24.
CK_Rx- (T.M.D.S.)
25.
C1: Analog Red
26.
C2: Analog Green
27.
C3: Analog Blue
28.
C4: Analog horizontal sync
29.
C5: Analog GND return (analog R, G, B)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the
cable cover.
2.4.3 DVI-2 connector (DVI-D)
Overview
Image 2-8
1.
D2_Rx- (T.M.D.S.)
16
K5903252 (451920612633) /02
MDSC-2324
Advertisement
Table of Contents
