Nexxis Or; Power Supply Connection - Barco MDSC-2232 DDI User Manual

3. Display installation
Image 3-5
W
ARNING
cables for the connection to peripheral devices.
3.3

Nexxis OR

Overview
Connecting your MDSC-2232 to Barco's Nexxis OR system allows you to distribute video, graphics, audio
and computer data over the IP network, in raw uncompressed format, inside the operating room and even
between surgical suites.
To connect your MDSC-2232 to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-2232 in your network is avail-
able in the dedicated user guides. Please visit
Nexxis OR is only available on the MDSC-2232 MNA version.
3.4

Power supply connection

To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your MDSC-2232
display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the
proper power cord delivered in the packaging.
Warning:To avoid risk of electric shock, the external DC power supply must be connected to a mains
with protective earth. The ground connection on the display's DC power input connector has
no protective earth function. The MDSC-2232 display protective earth connection is provided
via a dedicate pin (see next steps).
18
:
To maintain compliance with EMC regulation, use only shielded interface
4
www.barco.com to obtain these user guides.
K5902105 (451920611791) MDSC-2232 25/08/2015