Table of Contents
Advertisement
Advanced operation
5.3.3 Zoom
About zoom
The available zoom factors for your display are:
•
None
•
10%
•
20%
•
30%
•
40%
•
50%
The zoom factor can also be selected through a shortkey function or via the extended keyboard
functionality.
To select a zoom factor
1.
Bring up the OSD main menu.
2.
Navigate to the Display Format menu.
3.
Enter the Zoom submenu.
4.
Select one of the available zoom factors and confirm.
5.3.4 Image Size
About image size
The available image sizes for your display are:
•
Full Screen (fill the screen, image aspect-ratio can be altered)
•
Aspect (fill the screen on largest dimension, no modification in image aspect-ratio)
•
Native (input pixel to LCD pixel mapping, no scaling)
In Aspect and Native, the image may be displayed with black bars on top/bottom or left/right.
The image size can also be selected via the extended keyboard functionality.
To select the image size
1.
Bring up the OSD main menu.
2.
Navigate to the Display Format menu.
3.
Enter the Image Size submenu.
4.
Select one of the available image sizes and confirm.
5.3.5 2
nd
Picture Mode
About 2
nd
picture modes
The available 2
nd
picture modes for your display are:
•
Off
•
Small PiP: 30% of Primary height in top-right corner
•
Large PiP: 50% of Primary height in top-right corner
•
Side-by-Side: Primary and Secondary input of equal height
•
S.b.S. Native: The 2 images are displayed with input pixel to LCD pixel mapping, with image crop if
necessary
48
K5903252 (451920612633) /02
MDSC-2324
Advertisement
Table of Contents
