Nexxis Or; Power Supply Connection - Barco MDSC-2326 DDIH User Manual

Image 3-6
3.5

Nexxis OR

Overview
Connecting your MDSC-2326 to Barco's Nexxis OR system allows you to distribute video, graphics, audio
and computer data over the IP network, in raw uncompressed format, inside the operating room and even
between surgical suites.
To connect your MDSC-2326 to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-2326 in your network is avail-
able in the dedicated user guides. Please visit
Nexxis OR is only available on the MDSC-2326 MNAH version.
3.6

Power supply connection

To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your MDSC-2326
display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the
proper power cord delivered in the packaging.
Note: The ground and the shield connections on the power input connector have no Protective Earth
function. A Protective Earth connection is provided via a dedicated pin (see image 3-8).
Image 3-7
K5902135 (451920612561) MDSC-2326 28/02/2017
4
www.barco.com to obtain these user guides.
3. Display installation
1 2 3
19