Display installation
3.1 VESA mount installation
Overview
The display supports mounting arm & stands according to the VESA 100 mm standard.
CAUTION: Use an arm that is approved by VESA.
CAUTION: Use an arm that can support a weight of least 10 kg (22,05 lbs).
The monitor VESA interface has been designed for a safety factor 6 (to support 6 times the monitor
weight). In the medical system, use an arm with suitable safety factor (IEC60601–1).
To mount the display to an arm stand
1.
Attach the arm stand firmly to the panel using the included 4 hexagonal screws (M4 x 25 mm) and the dented
washers. Use the included Allen key to fix the screws.
Image 3-1
CAUTION: The 4 screws included with this display (M4 x 25 mm) can be used for an external VESA
arm interface with a thickness of up to 5 mm.
If, due to the thickness of the external VESA arm interface (=V), the length of the provided screws
(=L) is not suitable, consider the following rule:
L
= V + 20 mm
min
L
= V + 30 mm
max
3.2 Cover removal
To remove the connector compartment cover
1.
Loosen the screws fixing the connector compartment cover.
2.
Slide the cover downwards to remove it from the display.
1
2
Image 3-2
22
K5903252 (451920612633) /02
1
2
MDSC-2324