Software Update; System Requirements; Preparation; Gathering Data - Teldat APR222ac Installation Manual

Table of Contents

Advertisement

Teldat SA
Note
All Teldat devices are delivered with the same username and password. This means they are not pro-
tected against unauthorized use as long as the password remains unchanged. Make sure you change
said password to stop your device from being unduly accessed!
Section

3.1.2 Software update

Your device contains the system software version that was available at the time of production. Since then, more re-
cent versions may have been released. You can easily update your device using GUI through the Maintenance-
>Software &Configuration menu.
Section
Software Update

3.2 System requirements

Your PC must meet the following system requirements for configuration purposes:
• Internet Explorer or Mozilla Firefox.
• Installed network card (Ethernet).
• TCP/IP protocol installed (see

3.3 Preparation

To get ready for configuration, you need to...
• Obtain the data required for the basic configuration.
• Check whether the PC you need to use for configuration purposes meets the necessary requirements.
• Install the Dime Manager software, which gives you more tools to work with your device.

3.3.1 Gathering data

The main data for the basic configuration can be gathered quickly, as no information is required that needs in-depth
network knowledge. If applicable, you can use the example values.
Before starting the configuration process, you should gather data for the following purposes:
• IP configuration (mandatory if your device is in the ex works state).
• Configuration of a wireless network connection in Access Point mode (optional).
The following table gives examples of possible values for the necessary data. You can enter your personal data in
the "Your values" column, for future consideration.
If you configure a new network, you can use the values for IP addresses and netmasks that appear in the example.
When in doubt, ask your system administrator.
Basic configuration
To configure basic settings in your gateway, you need information on your network environment:
IP configuration of the access point
Access data
IP address of your access point
Netmask of your access point
APR222ac
Modify system password
on page 10 describes how to change your password.
on page 11 describes the updating process.
Configuring a PC
on page 8).
Example value
192.168.0.252
255.255.255.0
Your values
3 Basic configuration
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APR222ac and is the answer not in the manual?

Questions and answers

Table of Contents