Web Live Screen Operation - Panasonic AW-UE4 Series Operating Instructions Manual

Web Live Screen Operation

You can display images from the camera on a personal computer and perform camera operations, such as pan, tilt,
zoom, and focus control.
(1)
(2)
(3)
(4)
Name
(1) Live/Setup
(2) RTMP
(3) OSD Menu Operations
(4) Power
(5)
Function
Click [Live] to switch to live screen. Click [Setup] to switch to setup screen.
Setup for uploading the camera's live view to the broadcasting platform (ex: YouTube).
Click [Start] button to start uploading the live image to pre-registered broadcasting
platform. When RTMP starting, the start button will turn into stop button.
To stop, click [Stop] button
To setup RTMP, please refer
: Use this to select whether the camera's on- screen displays are to be
shown.
The items are selected using the [ ▲ ] [ ▼ ] [] [] buttons.
If a selected item has a sub menu, this sub menu is displayed by
:
pressing the [OK] button.
: It cancels the selection of the setting which is being changed. It restores
the pre-change setting.
[Note] On-screens displays are not displayed on JPEG images on web screens.
: Turn the unit on.
: Set the unit to Standby mode.
In the Standby mode, all the buttons on the live screen except for the [Power ON]
button and [Standby] button are disabled.
[Note]
If [Power ON] or [Standby] is selected too quickly, the status selected and the display
shown may not correspond. In a case like this, follow the steps below to restore the
correct status display: For Windows:
Press the [F5] key on the keyboard of the personal computer.
For Mac:
Press the [Command] + [R] keys on the keyboard of the personal computer.
The pan/tilt position return to the place just before entering STANDBY mode when
returning from STANDBY mode to POWER ON mode.
If the power is turned off, the pan/tilt position returns to the initial state.
(6)
"RTMP
setting" section.
51
(7)