Video - Panasonic AW-UE4 Series Operating Instructions Manual

Symptom
Cannot access from a web
browser

Video

Symptom
No pictures are displayed
or the pictures are
disturbed
The picture is flipped
vertically
Multiple color bands (color
bars) are displayed
The menu screen is
displayed
It is difficult to view the
menu screens
Something is wrong with
the coloring of the pictures
The pictures are too light
or too dark
Does the subnet mask setting match the network subnet of the connection
destination?
→ Check out the subnet mask settings of the unit and access devices, and then
consult with the network administrator.
Has the "Use a proxy server" setting been selected by the web browser? (When
the unit and the personal computer are connected to the same subnet)
→ If a proxy server has been set using the [proxy setting] of the web browser, it is
recommended that a "Don't use proxy" address be selected as the unit's IP address
setting.
Has the wrong default gateway been set for the unit? (When the unit and
personal computer are connected to different subnets)
→ Check out the default gateway that has been set for the unit, and then consult with
the network administrator.
Has the unit been connected properly to the other connected devices?
If the system is configured in such a way that the picture is also switched when
the unit to be operated is selected, has the correct unit been selected?
Has the image signal setting been selected correctly?
While outputting video from HDMI, if the USB device is disconnected, the HDMI
output video may be disrupted. Do not disconnect the USB device while using
HDMI output.
Has the Install Position setting been selected correctly
Switch to the camera picture.
Exit the menu.
Depending on the HDMI monitor you are using, you may experience one or
more of the symptoms described below. These symptoms are especially
noticeable when any of the SD formats is used: This is normal and not
indicative of any trouble.
 The resolution of the characters in the camera menu displays changes as the
background image changes.
 Depending on the edge enhancement setting established for the monitor, white
lines appear in front of the black shadows of the menus.
 Depending on the edge enhancement setting established for the monitor, the
background colors may be superimposed onto the white parts of the menus.
Activate the ATW (Auto tracking white adjustment) function.
In some situations, the proper colors may not be reproduced using the ATW
function.
→ In cases like this, proceed with the white balance adjustment.
The pictures may be dark if the analog video signal cables are too long because
this will cause signal attenuation.
Cause and solution
Cause and solution
76