Network Settings; Network - Panasonic AW-UE4 Series Operating Instructions Manual

Network Settings

Configure network and RTMP setting in the Network setup screen.
Click [Setup] > [Network].

Network

Setup IPv4 and IPv6 network.
Click [Setup] > [Network] > [Network].
 IPv4 network
Click [Set] button to save the configuration.
DHCP
Select the method in which the IP address is configured. The default is off.
IP Address
Input the unit's IP address here when the DHCP function is not going to be used. Input an address that will
not .duplicate an existing IP address which has been set for a personal computer or another network camera. The
default IP is 192.168.0.10
[Note]
Multiple IP addresses cannot be used even when the DHCP function is used. For details on the DHCP server
settings, consult your network administrator.
Subnet Mask
Input the unit's subnet mask here if the DHCP function is not going to be used.
The default is 255.255.255.0.
67