Panasonic AW-HE50S Brochure & Specs

AW-HE50 Main Specifications
AW-HE50S (SDI Model)
Imaging Sensors
Lens Motorized 18x zoom, f1.6 to 2.8 (f=4.7 to 84.6 mm,35 mm equivalent: 36.9 mm to 664.5 mm)
Focus
Horizontal Resolution
Minimum Illumination
S/N
Gain Selection
Storage Mode
Step 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Electronic Shutter Speed
Gamma
White Balance
Chroma Amount Variability
Scene File
Color Bar
Output Format
HD/SD-SDI
Video Output HD/SD analog component *
Composite *
LAN
Interface
RS-422
Synchronization System Internal/External synchronization (BBS)
Rotation Range
Rotation Speed
NC35 (at normal speed), NC40 (at fastest speed when preset)
Quietness
Power Supply / Power Consumption
DC12 V ±10 % (AC adapter provided), 1.3 A
Operating Temperature
Operating Humidity
Dimensions (W x H x D) 160 mm x 178 mm x 166 mm (6-5/16 " x 7 '' x 6-9/16 '') (excluding protrusions, cable cover, direct ceiling mount bracket)
Weight
Standard Accessories Mounting Bracket (for table or ceiling), Mounting Bracket (for main unit), Mounting Screws, AC Adaptor, Power Cable, Cable Cover
Be sure to use the included AC adaptor and power cable
AW-HS50 Main Specifications
HD (1080/59.94i, 1080/50i, 1080/23.98PsF, 1080/24PsF,
Video Format 720/59.94p, 720/50p)
SD (480/59.94i, 576/50i)
Y:Cb:Cr, 4:2:2 10 bit (8 bit for FMEM)
Video Processing
RGB, 4:4:4 8 bit
M/E 1 M/E
Standard: 4 SDI inputs (SDI-IN1 to 4)
Standard: 1 DVI-D input (DVI-IN)
XGA (1024 x 768), WXGA (1280 x 768),
SXGA (1280 x 1024), WSXGA+ (1680 x 1050),
UXGA (1600 x 1200), WUXGA (1920 x 1200)
Video Input
Vertical frequency: 60 Hz
1080/50p, 1080/59.94p
Video output formats of the AW-HE50H are not supported.
Analog input signals are not supported.
Standard: 2 SDI outputs
(SDI-OUT1 to 2 each, 2 output distribution for SDI-OUT1)
Standard: 1 DVI-D output (DVI-OUT)
XGA (1024 x 768), WXGA (1280 x 768),
SXGA (1280 x 1024), WSXGA+ (1680 x 1050),
UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Video Output 1080/50p, 1080/59.94p
High-resolution multi view mode supported:
Signals are also output with a high resolution even when SD
has been selected as the system mode.
When the high-resolution multi view mode is enabled, MV is
assigned to the DVI-OUT connector, and MV cannot be
assigned to the SDI-OUT1 connectors or SDI-OUT2 connector.
Analog output signals are not supported.
10BASE-T/100BASE-TX (for IP control)
LAN RJ45 x 1
Interface GPI INPUT x 5 channels D-sub 15 pin
TALLY/GPI
GPI OUTPUT x 7 channels (female) x 1
DC12 V ±10 % (AC adapter provided), 2.0 A
Power Supply / Power Consumption
Operating Temperature 0 °C to +40 °C (32 °F to 104 °F)
Operating Humidity 10 % to 90 % (no condensation)
Dimensions (W x H x D) 210 mm x 67 mm x 177 mm (8-1/4 " x 2-5/8 " x 6-15/16 ") (excluding protrusions)
Weight Approx. 1.4 kg (3.1 lbs.) (without options)
Standard Accessories AC Adaptor, Power Cable
Be sure to use the included AC adaptor and power cable
Specifications and functions are subject to change without notice.
The image on the screen is a composite image. Composite images, photographs, and illustrations are included for reference use only.
www.panasonic.com/broadcast
AW-JAC50S10
AW-HE50H (HDMI Model)
1/3 " Full-HD MOS
Auto/Manual switchable
850 TV Lines Typ (Centre area)
3 lx (50 IRE, F1.6, +36 dB)
54 dB Typ
Auto,0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB
0 dB, 6 dB, 12 dB, 18 dB
Syncro-scan 60.24 Hz to 646.21 Hz
Off, Normal (Low, Mid, High), Cinema
AWB A, AWB B, ATW
7 levels variability
FullAuto, Manual1, Manual2, Manual3
FULL BAR
HD: 1080/59.94i, 720/59.94p SD: 480/59.94i
HDMI
HD/SD analog component *
Composite *
10BASE-T/100BASE-TX, IPv4 RJ45 x 1
AW-series protocol, plus selected third-party support *
Internal synchronization
Pan: ±175 °, Tilt: +90 ° to –30 °
Max. 90 °/sec. or more
DC12 V ±10 % (AC adapter provided), 1.2 A
0 °C to +40 °C (32 °F to 104 °F)
20 % to 90 % (no condensation)
Approx. 1.4 kg (3.1 lbs.)
* Multi-interface Cable (AW-CA20T6) is required
Wipe Pattern
Wipe x 13
BKGD
Transition Type Cut, Mix, Wipe (including DVE)
Selectable Materials Black, White, CBGD, FMEM1, FMEM2
FTB
Number of Keys 1
Key Type Linear key, Luminance key, Chroma key
KEYER
Transition Type Mix
Number of PinP 1
PinP Transition Type Mix
BUS Transition Yes (Mix)
Number of AUX BUS 1
SDI-IN1 to 4, DVI-IN,
CBAR, CBGD, BLACK,
AUX BUS Selectable Materials
FMEM1, FMEM2,
PGM, PVW, KOUT, CLN, MV
Yes (Mix)
BUS Transition
SDI-IN1 to 4, DVI-IN (DVI-IN is always-on)
Frame Synchronizer
Freeze SDI-IN1 to 4, DVI-IN
Input
Dot by Dot
SDI-IN1 to 4
Function
Video Processing
SDI-IN1 to 4
Up-converter SDI-IN3, IN4
Single Screen Display
Labels, Tally indication, Split-screen (the screen may
be split into 4, 5a/5b, 6a/6b, 9 and 10a/10b sections)
MultiViewer
MV frames, Labels, Tally indications,
Output
camera setting information, and Audio Level Meters
Function
are not shown on SDI-OUT1.
Single Screen Display
OSD
SDI-OUT2,DVI-OUT (unshown on SDI-OUT1)
Audio Level Meter SDI embedded audio (group1/ 1 ch, 2 ch)
2 channels
The image data in the Frame Memory is stored even
when the power is off.
Frame Memory Video processing for the Frame Memory is 8-bit.
OSD, Frames, Labels, Tally indications, camera
setting information, and Audio Level Meters for
MultiViewer are not stored in the Frame Memory.
PinP Preset
Memory Function
Effect Dissolve Function
The Compact New 50 Series:
Production Quality Video
with IP Network Control
Compact Live Switcher Compact Live Switcher
Compact Live Switcher
AW-HS50 AW-HS50
AW-HS50
AW-HE50S/H
HD Integrated Camera
AW-HS50
Compact Live Switcher
AW-RP50
Remote Camera Controller
HD Integrated Camera HD Integrated Camera
HD Integrated Camera
AW-HE50S/H AW-HE50S/H AW-HE50S/H
Remote Camera Controller Remote Camera Controller Remote Camera Controller
AW-RP50 AW-RP50 AW-RP50