Image/Audio Settings; Video Over Ip - Panasonic AW-UE4 Series Operating Instructions Manual

Image/Audio Settings

Video over IP

The JPEG image and H.264/H.265 image settings as well as the settings related to image quality are selected in here.
Click [Setup] > [Image/Audio] > [Video over IP]
[Note]
 IP control can be performed but if you do not want to perform IP image transmission, set [H.264/H.265
transmission] to [Off].
 Images and audio are not synchronized. Therefore, images and audio may be slightly out of sync.
 The audio may skip depending on the network environment.
 JPEG
Set JPEG image settings.
Click [Set] to save the configuration.
- Image capture size: Select the resolution (1280×720 or 640×360) for JPEG images.
Frame rate: Set the frame rate (10 or 30) for JPEG images.
-

H.264/H.265
Set H.264/H.265 image settings.
Click [Set] to save the configuration.
[Note]
Only JPEG images can be displayed on web screens.
Stream transmission
Whether to transmit images is set here. The default is On.
When Priority mode is USB(4K) or HDMI(4K), the stream transition is off.
Codec
Select the H.264 or H.265 as image codec.
Image capture size
Select the resolution (640x360, 1280x720, 1920x1080, or 3840x2160) for H.264/H.265 images.
56