Panasonic AW-UE4 Series Operating Instructions Manual page 19

4. Input the network items, and click the [Save] button.
[Note]
 When a DHCP server is being used, [DNS] of the Easy IP Setup Software can be set to [Auto].
 After the [Save] button is clicked, it takes about 1 minute for the settings in the unit to be completed. If the USB
terminal power supply or LAN cable is disconnected before the settings are completed, the settings will be canceled.
In this case, repeat the steps to establish the settings.
 When a firewall (including software) has been introduced, enable access to all the UDP ports.
19