Fisheye Dewarping - GeoVision GV-IP Decoder Box Series User Manual

3.3 Fisheye Dewarping

You can enable fisheye dewarping if the fisheye camera is in Single View or Grid 1 of the
Quad View. Right-click the live view of the fisheye camera and select Fisheye to enable
fisheye dewarping.
Note: Fisheye dewarping is only supported by GV-IP Decoder Box Plus.
The following fisheye settings are available:
Image Alignment: Align the red circle with the inner edge of the camera image if

needed. You can adjust the red circle by dragging and by scrolling the mouse.
Camera Modes:

Fisheye: Quad view: Composed of 3 PTZ views and a circular source image.

Fisheye: 360 degree: Composed of two PTZ views and one 360º panoramic

view.
Fisheye: Dual 180 degree: Composed of two 180º views.

Fisheye: Single view: Composed of one PTZ view.

Mount Ceiling / Mount Wall / Mount Ground: Select according to where the camera is

mounted.
Figure 3-3
Accessing Live View
3
45