Overview; Gv-Ip Decoder Box Series - GeoVision GV-IP Decoder Box Series User Manual

1.8 Overview

1.8.1 GV-IP Decoder Box Series

1.8.1.1 Front View
GV-IP Decoder Box Ultra
No. Name
Micro SD Card
1
Slot
2 LED Indicators
3 IR sensor
4 Default
5 USB 3.0
Figure 1-5
Function
Connect to a micro SD card for local storage of snapshots and
firmware upgrade.
The red LED indicates the power is supplied.
The green LED indicates the system is ready for use.
Receive signal from GV-IR Remote Control for controlling the user
interface at the maximum operation distance of 7 m (22.97 ft).
Reset the device to the default factory settings. Use a pin to press the
default button for about 10 seconds. The system will then reset and
reboot itself shortly. See 5.2 Restoring Default Settings.
Connect to a GV-Joystick V2, USB mouse, or USB storage device
Introduction
1
13