What Next - Sun Microsystems Enterprise 220R Service Manual

4. Align the module with its socket until it contacts the socket evenly along the
socket's length.
5. Press firmly down on both corners of the module until the bottom edge is
firmly seated in the socket.
You will hear a clicking sound when the module is fully seated.
6. Repeat Steps 3 through 5 for each module you want to install.
3.2.4

What Next

Complete this task to reassemble the system:
4 Section 2.7 "How to Replace the System Cover" on page 67
When you are ready to restart the system, be sure to run OpenBoot Diagnostics tests
to verify that the system functions correctly with the new parts you have just
installed. For additional information, see:
Servicing the Main Logic Board and Components
93