How To Slide The System Into The Rack; Before You Begin; What To Do - Sun Microsystems Enterprise 220R Service Manual

2.5

How to Slide the System Into the Rack

2.5.1

Before You Begin

If you have been working inside the system, see:
4 Section 2.7 "How to Replace the System Cover" on page 67
2.5.2

What to Do

1. Release the two flat spring catches that lock the system into its current position.
Press in on both spring catches to free the system glides. One flat spring catch is
attached to each inner glide on the system chassis, as shown in the following
figure
Preparing to Service the System
63