Power Cord Connection - Sun Microsystems Enterprise 220R Service Manual

Placement of a Sun Product
Caution – Do not block or cover the openings of your Sun product.
Never place a Sun product near a radiator or heat register. Failure to
follow these guidelines can cause overheating and affect the reliability of
your Sun product.
Caution – The workplace-dependent noise level defined in DIN 45 635
Part 1000 must be 70Db(A) or less.
SELV Compliance
Safety status of I/O connections comply to SELV requirements.

Power Cord Connection

Caution – Sun products are designed to work with single-phase power
systems having a grounded neutral conductor. To reduce the risk of
electric shock, do not plug Sun products into any other type of power
system. Contact your facilities manager or a qualified electrician if you
are not sure what type of power is supplied to your building.
Caution – Not all power cords have the same current ratings.
Household extension cords do not have overload protection and are not
meant for use with computer systems. Do not use household extension
cords with your Sun product.
Caution – Your Sun product is shipped with a grounding type
(three-wire) power cord. To reduce the risk of electric shock, always plug
the cord into a grounded power outlet.
The following caution applies only to devices with a Standby power switch:
Safety Agency Compliance Statements
27