What Next - Sun Microsystems Enterprise 220R Service Manual

4. Insert and tighten the four flat-head Phillips screws that secure the drive in its
bay.
There are two screws on each side that secure the drive in the RMA.
4.6.3

What Next

To reassemble the system, complete these tasks:
4 Section 4.4 "How to Replace the Removable Media Assembly (RMA)" on page 135
4 Section 2.7 "How to Replace the System Cover" on page 67
When you are ready to restart the system, be sure to run OpenBoot Diagnostics
(OBDiag) tests to verify that the system functions correctly with the new parts you
have just installed. For additional information, see:
4 Section 7.6 "How to Use OpenBoot Diagnostics (OBDiag)" on page 195
You must also perform a reconfiguration boot so that your system is able to
recognize any new device(s). For additional information, see:
4 Section 2.3 "How to Initiate a Reconfiguration Boot" on page 58
140
Sun Enterprise 220R Server Service Manual January 2000, Revision A