Preparing The Power Source; Ceiling Mount Installation - Panasonic AW-UE4 Series Operating Instructions Manual

Preparing the Power Source

 Power can be provided through the USB cable connection from the connected device(ex:
laptop, PC)
 Use the PoE switch/hub connect to LAN port and provide the power to the AW-UE4 unit.
 Please use AC adapter (5V, 1A or more) or PoE switch / Hub to output HDMI.
 Warning:
This product is intended to be supplied by a UL Listed Power Adapter or DC power source
marked "L.P.S." (or "Limited Power Source"), rated 5Vdc, 1.0A minimum, Tma =40 degree C
minimum. If need further assistance, please contact Panasonic for further information.

Ceiling Mount Installation

 Do not use any screws other than those supplied with the unit (do not use wood screws, nails, etc.).
 Make sure the camera is firmly mounted to the ceiling, with no tilting or wobbling.
1.
Install the mount kit (included) to bottom of the camera. Use the mount screw
(included) to security the mount kit and camera.
Screw: I-head type, 1/4 x20 UNC
Clamping torque: 1.47N · m(15kgf · cm)
14