Panasonic AW-UE4 Series Operating Instructions Manual page 58

3
Click the MAC address/IPv4 address of the camera to be set, and click the
[Network settings] button.
 When a DHCP server is being used, the IP address allocated to the unit can be checked by
clicking the [Search] button of the Easy IP Setup Software.
 If IP addresses have been duplicated, the duplicated camera No. is displayed in the [IPv4
overlap] column of the relevant camera.
 Clicking [Access Camera] displays a Live screen of the selected camera.
 The IPv4/IPv6 switching function cannot be used with this camera (only compatible with IPv4).
4
Input the network items, and click the [Save] button.
 When a DHCP server is being used, [DNS] of the Easy IP Setup Software can be set to [Auto].
 After the [Save] button is clicked, it takes about 2 minutes for the settings in the unit to be
completed.
 If the USB cable or LAN cable is disconnected before the settings are completed, the settings will
be canceled. In this case, repeat the steps to establish the settings.
 When a firewall (including software) has been introduced, enable access to all the UDP ports.
58