Network Settings; Use The Easy Ip Setup Software To Establish The Unit's Settings - Panasonic AW-UE4 Series Operating Instructions Manual

Operating Instructions

Network Settings

Use the Easy IP Setup Software to Establish the Unit's Settings

The settings related to the unit's network can be established using the Easy IP Setup Software
supplied. You can obtain Easy IP Setup Software (EasyIPSetup.exe) by downloading it from the
following website:
https://pro-av.panasonic.net/
 To establish the settings for a multiple number of units, the settings must be selected for each
camera involved.

If the settings cannot be established using the Easy IP Setup Software, select the settings
separately for the unit and personal computer on the Network setup screen [Network] of the setting
menu. (Operating Instructions (PDF) → "Web Screen configuration" → "Network Settings
[Network]")
[Note]
 If, after the network settings have been established, another device in the same network has the
same IP address, the network operations will not be performed properly.
 Set the IP address in such a way that it does not duplicate an existing IP address.
 Do not establish network settings from a multiple number of Easy IP Setup Software programs at
the same time for a single camera. The IP address settings may no longer be recognized as a
result.
 To enhance the security of the Easy IP Setup Software, it will not be possible to make network
settings for the target camera once about 20 minutes or more have elapsed after turning the power
of the camera on. (When the [Easy IP Setup accommodate period] setting is [20min].
 The Easy IP Setup Software cannot be used from a different subnet via a router.
 Use Easy IP Setup Software ver. 4.25R00 or newer.
1
Double-click EasyIPSetup.exe to start the Easy IP Setup Software.
2
Click the [Search] button.
57