Table 3-4 Monitor Troubleshooting - Compaq XP1000 Installation And Setup Manual

3-14 Compaq Professional Workstation XP1000
Problem
Monitor power indicator
is not on.
Distorted, rolling, or
flickering screen
display, or
wrong/uneven color.
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Comments:
Part Number: EK-CPWXP-S1.B01 File Name: d-ch3 Troubleshooting.doc Last Saved On: 5/28/99 2:47 PM
Table 3-4
Monitor Troubleshooting
Possible Cause
Monitor is turned off.
Power cord is not connected.
No power at wall receptacle.
Monitor is defective.
Adjustments incorrect.
Wrong type of monitor.
Defective monitor.
Monitor signal cable loose or
damaged.
Compaq Confidential – Need to Know Required
Action
Turn on the monitor.
Connect the power cord to the system or a wall
receptacle.
Use another receptacle.
Try another monitor.
Adjust accordingly.
Try another monitor.
Try another monitor.
Inspect connector pins. Replace cable if
damaged.
continued