Rack Stability; Getting Help; Compaq Technical Support - Compaq XP1000 Installation And Setup Manual

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:

Getting Help

If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.

Compaq Technical Support

You are entitled to free hardware technical telephone support for your product
for as long you own the product. A technical support specialist will help you
diagnose the problem or guide you to the next step in the warranty process.
Compaq Confidential – Need to Know Required
Writer: SES Project: Compaq Professional Workstation XP1000 Installation and Setup Guide Comments:
Part Number: EK-CPWXP-SI.B01 File Name: a-frnt.doc Last Saved On: 6/3/99 9:58 AM
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack
installations.
The racks are coupled together in multiple rack installations.
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
About This Guide ix