Flat-Panel Monitor - Compaq Presario 7400 Series Maintenance And Service Manual

Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/trbnod1.html (2 of 6) [1/8/2002 3:52:59 PM]
DVD drive

flat-panel monitor

(on
select models only)
are provided in the tables below. The procedure for
Problem Probable cause(s)
Screen is Your computer may
blank. not support flat-panel
monitors.
Cannot find Your computer may
the video not have a digital
connector on flat-panel port (DFPP).
back of the
CPU for a
flat-panel
monitor.
The display The monitor does not
only fills part support your
of the screen. resolution setting.
power
USB ports
resolving hardware conflicts
Flat-panel monitor
Possible solution
See your authorized dealer or reseller about CPU
support for the Digital Video Interface (DVI) needed.
See your authorized dealer or reseller about CPU
support for flat-panel monitors.
FP400 and FP500 Series flat-panel monitors only
support the 1024 x 768 resolution mode. To change
your resolution setting in the Display dialog box:
1 Click on Start.
2 Point at Settings and click on Control Panel.
3 Double-click on Display.
4 Click on the Setting tab, and move the sliding
pointer to give 1024 x 768 pixel resolution.
is also described.