Compaq XP1000 Installation And Setup Manual page 25

Table 2-1
Starting a Microsoft Windows NT Installation
Step
10 Insert the 1.44-MB diskette
(AK-REQP*-CA) Need new part
number in drive A.
Press [Enter] to select the driver.
11 Press [Enter] to load the driver.
12
If you have the SN-KZPCA-AA option,
repeat steps 8-10 using driver floppy
built from the SDMS Software Device
Driver and Utilities CD as
recommended on page 2-11 to load
the SN-KZPCA-AA driver.
Note: During the installation you may need to keep changing the diskettes in order for the setup to load the
right files because the diskette that contains the HAL and ATAPI.sys does not contain the SN-KZPCA-AA
driver.
13
To continue,
Press [Enter].
Note: During the installation you may need to keep changing the diskettes in order for the setup to load the
right files because the diskette that contains the HAL ATAPI.sys does not contain the SN-KZPCA-AA driver.
Compaq Confidential – Need to Know Required
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Installation and Setup Guide Comments:
Part Number: EK-CPWXP-S1.B01 File Name: c-ch2 Setting Up an Operating System.doc Last Saved On: 5/28/99 11:47 AM
Action
You have chosen to configure a SCSI adapter for use
with Windows NT, using a device support disk provided
by an adapter manufacturer.
Select the SCSI) adapter you want from the following
list, or press [Esc] to return to the previous screen.
=>e.g., ATAPI (IDE)
Follow the screen prompts for mass-storage device-
loading support.
Setup will load support for the following mass storage
devices:
Qlogic PCI SCSI Host Adapter
Microsoft ATAPI driver
Symbios Logic PCI (53c8xx)
Setting Up an Operating System 2-5
continued
Result or Displayed Text
continued