Information On Validity; Technical Information; Explanatory Notes On Document - Webasto Thermo Top Evo Installation Documentation

Kia Rio

Information on Validity

This installation documentation applies to Kia Rio Petrol vehicles - for validity, see page 1 - from model year 2011 and later,
assuming technical modifications to the vehicle do not affect installation, any liability claims excluded. Depending on the
vehicle version and equipment, modifications may be necessary during installation with respect to this 'installation documen-
tation'.
Vehicle and engine types, equipment variants and other specifications not listed in this installation documentation have not
been tested. However, installation according to this installation documentation may be possible.

Technical Information

Special Tools
• Hose clamp pliers for auto-tightening hose clamps
• Hose clamp pliers for Clic hose clamps of type W
• Automatic wire stripper 0.2 - 6mm²
• Crimping pliers for cable lug / tab connector 0.5 - 6mm²
• Torque wrench for 2.0 - 10 Nm
• Hose clamping pliers
• Metric thread-setter kit
• Deep-hole marker
• Webasto Thermo Test Diagnosis with current software
Dimensions
• All dimensions are in mm.
Tightening torque values
• Tightening torque values of 5x13 heater bolts and 5x11 heater stud bolts = 8Nm.
• Tightening torque value of 5x15 water connection piece retaining plate bolt = 7Nm.
• Tighten other bolt connections in accordance with manufacturer's instructions or in accordance with state-of-the-art-
technology.

Explanatory Notes on Document

You will find an identification mark on the outside top
right corner of the page in question to provide you
with a quick overview of the individual working steps.
Mechanical System
Electrical System
Coolant Circuit
Combustion Air
Fuel
Exhaust Gas
Software
Ident. No.: 1318004J_EN
Special features are highlighted using the following symbols:
Specific risk of damage to components.
Specific risk due to electrical voltage.
Specific risk of injury or fatal accidents.
Specific risk of fire or explosion.
Reference to the manufacturer's vehicle-
specific documents or to the general in-
stallation instructions of Webasto com-
ponents.
Reference to a special technical feature.
The arrow in the vehicle
icon indicates the
position on the vehicle
and the viewing angle.
Tightening torque according to the manufac-
turer's vehicle-specific documents.
Status: 30.03.2016 © Webasto Thermo & Comfort SE
F
Nm
!
4