Siemens SITOP UPS1600 Getting Started page 38

Parameterizing the SITOP UPS1600
6.2 Switching off the UPS by a user program when the power fails
6. Connect block parameters "UPS_execute_reset" and "UPS_ready_for_reset" (for a
7. Save your project.
38
description of the parameters, refer to the table below).
Example: Bit memory "M0.0" or "M0.1" is set for the block parameters.
Parameters
UPS_execute_reset
UPS_ready_for_reset
Declaration Data type
Input Bool
Output Bool
Description
Shutdown signal at the
UPS1600
Signal to run down the system
SITOP UPS1600 under STEP 7 V5
Getting Started,