Siemens SITOP UPS1600 Getting Started page 34

Parameterizing the SITOP UPS1600
6.2 Switching off the UPS by a user program when the power fails
6. Save the table and close the symbol Editor.
7. Open the library "UPS1600 library > Blocks".
8. Select all blocks, drag them and drop them in the "Blocks" folder of your target project.
Function block FB160 has now been integrated into the project.
34
The blocks are inserted into your target project.
SITOP UPS1600 under STEP 7 V5
Getting Started,