I/Os - Siemens SIMATIC PCS 7 Function Manual

Once the booking process is complete, part lots which have been rebooked and their partial
quantities are available for further processing at the 30 block outputs "QMLx_ID", "QMLxAC_I"
and "QMLxAC_R" (x = 1..10).
Converting units
You can convert units. This is possible if a convertible unit with the correct notation has been
configured at the storage location in the OS editor screen and at the UOM block input. You
can also define your own units, notations and conversion formulas in the C function
FB_ConvertUOM.fct.
Liter
Hectoliter
Cubic meter
Kilogram
Tons
5.3.4

I/Os

Input parameters
The following table shows the input parameters of the "FB_ST_AC" block:
Parameter
SAMPLE_T
RUNUPCYC
ID
ARCH_NA
REC_ID
DST_ID
FORMAT
UOM
BA_NA
BA_ID
COUNT
TIME_MON
R_REC_ST
AC_INOUT
CH_MAT
L_REC_W
L_MAT_DEL
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Unit Pre-defined notations
l, dm³, cdm, dm^3
hl
m³, cm, m^3
kg
t
Sampling time [s]
Number of startup cycles
ID of the block
Archive name
Data record number in user archive
Destination storage location ID in user ar‐
chive
Data format content 0 = DINT, >1 = REAL
Unit
Batch name
Batch ID
Number of repetitions if an error occurs
Read job monitoring time
Input structure with job feedback from
FB_UA_RM
1 = "Material lot rebook" mode
1 = "Material conversion" mode
Interconnectable input: 1 = Write data request BOOL
Interconnectable input: 1 = Delete material
Unit you can convert to
Hectoliters (hl), cubic meters (m³, cm, m^3)
Liters (l, dm³, cdm, dm^3), cubic meters (m³, cm, m^3)
Liters (l, dm³, cdm, dm^3), hectoliters (hl)
Tons (t)
Kilograms (kg)
Description
Storage location management
5.3 FB_ST_AC
Type
REAL 1
INT 10
INT 0
STRING[16] ''
DINT 0
DINT 0
DINT 0
STRING[16] ''
STRING[32] ''
DWORD 0
INT 1
REAL 30.0
UDT_UA_R_ST
BOOL 0
BOOL 0
0
BOOL 0
Default
87