Siemens SIMATIC PCS 7 Function Manual page 184

Order management
7.1 FB_JOB
Job list
The data records of the jobs created are available at the following outputs for further processing:
TIT_Pxx
ID_Pxx
PNO_Pxx
SP_Pxx
DES_Pxx
BDT1_Pxx
BDT2_Pxx
ORI_Pxx
STAT_Pxx
xx = Position in the job list 01 to 10
Status signals for the job list
The status signals for the job list are available at the following outputs:
QRC_EDIT
QPA_REQ
QACC
QNOTACC
QLI_FULL
QLI_EMPTY
QVOID
QJOB_EN
QPA_COPY
Q_POS_CN
Q_POS_PA
Q_FREEPO
Q_FREERC
Releasing a job
A job can be released for launch using the "RUN_EN" input. A job in process is paused if job
release is reset. The input signal is available at the "QRUN_EN" output for further processing.
RUN_EN
184
Output
Job list item xx: Name
Job list item xx: ID
Job list item xx: Parameter set number
Job list item xx: Setpoint
Job list item xx: Description
Job list item xx: Time of creation part 1
Job list item xx: Time of creation part 2
Job list item xx: Creator
Job list item xx: Data record status (bit 0 = 1 -> reference quantity)
Output
Job is being edited / created = 1
Request to FB_XXXPA to read parameter set data = 1
New job successfully created = 1
New job could not be successfully created = 1
Job list full = 1
Job list empty = 1
Job interface is free
Next job can be activated
Request to FB_XXXPA (multiplexer mode) to copy parameter set data upon job ac‐
tivation = 1
Number of occupied positions in the job list
Data record number for the job selected in the job list
Next free position in the job list
Next free data record number
Input
Meaning
Meaning
Output
QRUN_EN 0 = Job disabled
1 = Job released
Function Manual, 07/2016, A5E38719883-AA
Meaning
Advanced Process Functions (APF)