Coolcube Circulator; Options - Princeton Instruments PhotonMAX System Manual

86
PORT #
Power Input: 100-240 VAC; 47 to 63 Hz, 3 A. DC power to camera is provided by the
self-switching power supply.
Fan: 24 CFM fan capacity at full power.

CoolCUBE Circulator

Closed loop system
Hoses: 3/8" ID, with no-drip quick disconnects at the circulator ends and CPC quick
disconnects at the camera ends
Coolant: 50:50 ethylene glycol and water at 25°C
Dimensions: Refer to Appendix B, "Outline Drawings", page 89
Circulator Weight (Filled): 6.0 lbs (2.7 kg)
Hose Weight (Filled): 3.0 lbs (1.4 kg) per hose

Options

A partial listing of options includes the WinView/WinSpec application software and
manual, Scientific Imaging ToolKit™ (SITK™) for LabVIEW
and fiber optic cables. Contact the factory for more information regarding options
available for your system.
PhotonMAX System Manual
PIN #
(not used)
21
(not used)
22
23 Shutter Output: TTL output for timing of external shutter
driver. Signal is high during Shutter Open Compensation Time
and exposure time. The pin does not provide power to drive the
shutter directly, so an external shutter drive controller is
required.
(not used)
24
GND: System digital ground. Any external circuitry intended to
25
interface with the trigger control signals must reference this
ground connection.
GND: System digital ground. Any external circuitry intended to
26
interface with the trigger control signals must reference this
ground connection.
SIGNAL Description
®
, fiber optic interface,
Version 1.B