Figure 13. Hardware Setup Wizard: Pvcam Dialog Box - Princeton Instruments PhotonMAX System Manual

28
Controller/Camera tab page will be displayed with the Use PVCAM checkbox
selected.
6. After making the following selections on the Controller/Camera tab page, you should
now be able to control the camera and acquire data at the default Detector Temperature
setting:
•
•
Note: For a step-by-step procedure on basic system operation, refer to the appropriate
"First Light" section, beginning on page 30 (Imaging applications) or page 35
(Spectroscopy applications).
PhotonMAX System Manual

Figure 13. Hardware Setup wizard: PVCAM dialog box

On the Controller/Camera tab page: Select "Frame Transfer" as the Readout
Mode.
On the Cleans tab page: Select "Clear Pre-Sequence".
Version 1.B