Figure 21. Cleans Tab - Princeton Instruments PhotonMAX System Manual

Chapter 5
Cleans tab page (Setup|Hardware): Select Clear Pre-Sequence as the
Clean Mode.
Experiment Setup|Main tab page (Acquisition|Experiment Setup...):
•
Exposure Time: 100 ms
•
Accumulations & Number of Images: 1
Experiment Setup|ROI tab page (Acquisition|Experiment Setup...):
Use this function to define the region of interest (ROI).
•
Spectroscopy Mode: Selected
•
Clicking on Full loads the full size of the chip into the edit boxes.
Experiment Setup|Timing tab page (Acquisition|Experiment Setup...):
•
Timing Mode: Free Run
•
Shutter Control: Normal
•
Safe Mode vs. Fast Mode: Fast Mode
Operation
Select
"Clear Pre-Sequence"
Figure 21. Cleans tab page
37