Cables; Certificate Of Performance; User Manuals - Princeton Instruments PhotonMAX System Manual

Chapter 4

Cables

Data Cable: The Data cable (6050-0545) has 20-pin, high-density (MDR-20)
connectors for interconnecting the camera and the host computer.
I/O Cable: (Optional) The I/O cable (6050-0546) has a female, DB26, high-
density connector that connects to the I/O connector. The five (5) BNCs at other end
of the cable provide access to the following five I/O signals (that can be used to
input a trigger to initiate data acquisition, to monitor frame readout status, and to
control an external shutter): Trigger In, Trigger Invert, Frame Readout, Expose Out,
and Shutter Out. Refer to "I/O Connector Pinout", page 84, for more information.
Circulator-Camera Power Cable: (For Liquid-Cooled Version Only): The
10' (3 m) power cable (6050-0564) has a Lemo connector on each end and connects
between the circulator to the camera to provide the camera power.

Certificate of Performance

Each PhotonMAX camera has a Certificate of Performance. This certificate states that
the camera system was assembled and tested according to approved Princeton
Instruments procedures. It documents the camera performance data as measured during
the testing of your PhotonMAX and lists the Sales Order, Purchase Order, and Camera
Serial numbers (useful if you ever need to contact Princeton Instruments Customer
Support).

User Manuals

PhotonMAX System User Manual: This manual describes how to install and use
the PhotonMAX camera and its components.
WinView/32 User Manual: This manual describes how to install and use the
application program. A PDF version of this manual is provided on the installation CD.
Additional information is available in the program's on-line help.
System Component Descriptions 15