System Layout; System Requirements; On-Site Installation Requirements - Daikin Altherma 3 GEO Series Installer's Reference Manual

9 LAN adapter
9.1.1

System layout

Integrating the LAN adapter into a Daikin Altherma system allows for
the following applications:
▪ App control (only)
▪ Smart Grid application (only)
▪ App control + Smart Grid application
App control (only)
a1
A
a3
X4A
See "9.2.2 Router" [ 4 46].
A
a1 Factory-mounted Ethernet cable
a2 Router
a3 Smartphone with app control
Smart Grid application (only)
B
b3
b2
X1A
X2A
230 V AC
b1
B See "9.2.4 Solar inverter/energy management
system" [ 4 47].
b1 Circuit breaker
b2 Solar inverter/energy management system
b3 Solar panels
C See "9.2.3 Electricity
c1 Electricity meter
c2 Electrical grid
App control + Smart Grid application
B
b3
X4A
b2
X1A
X2A
230 V AC
b1
See "9.2.2 Router" [ 4 46].
A
a1 Factory-mounted Ethernet cable
a2 Router
Installer reference guide
44
a2
C
c1 c2
meter" [ 4 46].
A
a3
a1
a2
C
c1 c2
a3 Smartphone with app control
B See "9.2.4 Solar inverter/energy management
system" [ 4 47].
b1 Circuit breaker
b2 Solar inverter/energy management system
b3 Solar panels
C See "9.2.3 Electricity
c1 Electricity meter
c2 Electrical grid
9.1.2

System requirements

The requirements posed on the Daikin Altherma system depend on
the LAN adapter application/system layout.
App control
Item
LAN adapter software It is recommended to ALWAYS keep the
LAN adapter software up-to-date.
Unit control method On the user interface, make sure to set
[2.9]=2 (Control = Room thermostat).
Smart Grid application
Item
LAN adapter software It is recommended to ALWAYS keep the
LAN adapter software up-to-date.
Unit control method On the user interface, make sure to set
[2.9]=2 (Control = Room thermostat).
Domestic hot water To allow for energy buffering in the domestic
settings hot water tank, on the user interface, make
sure to set [9.2.1]=4 (Domestic hot water
= Integrated).
Power consumption On the user interface, make sure to set:
control settings
▪ [9.9.1]=1 (Power consumption control
= Continuous)
▪ [9.9.2]=1 (Type = kW)
INFORMATION
For instructions on how to perform a software update, see
software" [ 4 49].
"9.4.4 Updating
9.1.3

On-site installation requirements

What you need on site to install the LAN adapter depends on the
system layout.
BRP069A61
Always
PC/laptop with Ethernet connector
Router (DHCP enabled)
Smartphone with the Online Controller app
Depending on the system layout
IF connection to an Electricity meter
electricity meter
2‑wire cable
(X2A)
IF connection to a 2‑wire cable
solar inverter/energy
Circuit breaker
management system
(100 mA~6 A, type B)
(X1A)
meter" [ 4 46].
Requirement
Requirement
BRP069A62
—
—
—
—
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569820-1A – 2019.09