Manual Operation; Structure And Components Of Solaris System - Daikin Rotex RPS4 Operating And Installation Instructions

3 x

Manual operation

3 Manual operation
3.1 Structure and Components of Solaris
system
Fig. 3-1 Standard design of a ROTEX Solaris solar system (ROTEX recommends a double-sided connection)
1 Cold water connection line
2 Domestic water (hot) distribution line
3 Stainless steel corrugated heat exchanger for domestic water
(hot)
4a Stainless steel corrugated heat exchanger for storage tank charg-
ing
4a Stainless steel corrugated heat exchanger for storage tank charg-
ing and heating support
5 Submersion sleeve for storage, return temperature sensors
6 Fill level display
7 Filling and draining hose (KFE BA,
8 Solaris R4 regulator
9 Solar return line (at the bottom on the solar panel)
10 Solar panel array
11 Solar flow line (at the top on the solar panel)
12 Thermal mixing valve (scalding protection, provided by customer)
13 Convection brake (accessory)
14 Solar flow layering pipe
15 Corrugated stainless steel heat exchanger for heating support
16 Thermal insulation sleeve for corrugated stainless steel heat ex-
changer for heating support
17 Solar return connection
18 Safety overflow connection
Tab. 3-1 Legend for fig. 3-1
6
A
B
FLS Solaris FlowSensor (flow measuring)
P
RPS4
t
T
T
T
16 52 15 accessory) T
GCU compact
HPSU compact
SCS/HYC
Zone with water for domestic use
Solar zone
Solaris operating pump
S
Regulation and pump unit
Storage temperature sensor
DHW
Solaris Solar panel temperature sensor
K
Solaris Return flow temperature sensor
R
Solaris Storage tank temperature sensor
S
Solaris Inflow temperature sensor
V
Gas Combi Unit
Solar tank with integrated interior heat pump unit
Energy store Sanicube Solaris / HybridCube
FA ROTEX Solaris RPS4 - 04/2016