Table of Contents
Advertisement
P2 InsEff1: Selection and settings for
Insert Effect 1
1
2
1. InputLevelMeter.............. (IN1, 2/CLP, –8, –18, –42dB)
This shows the input level of each effect.
The horizontal axis indicates the effect input, and the
vertical axis shows the level.
"IN2" will be input only if [INSERT EFFECT] "InsEff1"
tab page is "2in2outx2."
2. EffectNumber ......... [000, 001...128, U001...128, (#)]
Select the effect program.
"U001"–"U128" is the user area, where you can store
effect programs that you have edited.
If the effect program includes a control function, a "#"
will be displayed following the effect name.
The effects that can be selected will depend on the
"SelectEffType" setting in the [INSERT EFFECT]
"InsAsn" tab page. For the effects that are available in
each configuration, refer to "Effect Program List"
(→p.166).
3. EffectProgramName ..................... (Effect Program List)
When you press this button the "Effect Algorithm"
dialog box will appear. Here you can view the structure
of the program and on/off settings. An insert effect
program consists of up to five types of effect.
3a
3a. EffectIcon .............................................................
Use these to select the effect that you want to edit.
When you press an "EffectIcon" button, the "Edit Effect"
dialog box will appear.
For details on the parameters, refer to "Effect Parameter
List" (→p.137).
3aa. Effect On/Off................................... [On, Off]
This "On/Off" setting is linked with "Effect On/Off"
(3b).
3ab. Next..............................................................
Displays the next page.
4
5
6
3
3c
3d
3b
3aa
3ab
3ac. Prev ...............................................................
Displays the previous page.
3b. Effect On/Off ......................................... [On, Off]
Switches each effect on/off.
On: The effect is on.
Off: The effect is off.
3c. Control Device ......................................................
Specifies the effect parameter controlled by a control
device, and its maximum and minimum values.
This will appear if in the [SYSTEM/USB] "Control"
tab page you set "Asn" to "InsEff1"–"InsEff4."
3cb
3ca. Parameter ......................................................
Selects the parameter that will be controlled.
3cb. Max, Min .......................................................
Specifies the maximum and minimum values of the
parameter that can be controlled by the controller.
3d. Control On/Off ...................................... (On, Off)
Shows the state of effect control.
On: A "Parameter" is specified as the "Control
Device."
Off: "Off" is specified as the "Parameter" for
"Control Device." External control is disabled.
4. Bypass.......................................................................
This lets you compare the sound processed by the effect
with the unprocessed effect. Press the "Bypass" button
to bypass the effect (the unprocessed sound will be
heard).
Press the "Cancel" button to cancel bypass.
5. Rename .....................................................................
Here you can modify the name of the effect program.
Select the effect program whose name you wish to
modify, press the "Rename" button to access the dialog
box, and modify the name. A name of up to 16 characters
can be used. For details, refer to "2. Naming a song"
(→p.35).
After modifying the program name, use "Store" to
store it. The effect program name you modified will
be discarded unless you use "Store" to store it.
3ac
3ca
127
Advertisement
Table of Contents
