Delta InsightPower SNMP IPv6 for UPS User Manual page 61

2) Launch shell and enter the following command to create your own keys:
Please ignore it when prompted to provide passphrase.
'6$ .H\ VVKNH\JHQ ±W GVD
56$ .H\ VVKNH\JHQ ±W UVD
3) Upload DSA and RSA key files on the InsightPower UPS Web. Please refer to
5-3-1 Administration – Console for more information.
For Windows:
1) Please download and install PuTTY from http://www.putty.org.
2) Run puttygen.exe from the installed directory.
3) Select SSH-2 RSA from the Parameters area and click Key
key pair to generate a RSA key.
4) Select Conversions
RSA key. Please ignore it when prompted to provide key passphrase.
5) Select SSH-2 DSA from the Parameters area and select Key
key pair to generate a DSA key.
6) Select Export OpenSSH Key from Conversions and assign a file name to
the DSA key. Please ignore it when prompted to provide key passphrase.
7) Upload the DSA and RSA key files to the InsightPower UPS Web. Please re-
fer to 5-3-1 Administration – Console for more information.
Q14. How to test SNMPv3 in Linux?
Before you can access the SNMP OID (Object Identifier) via SNMPv3 protocol,
the SNMPv3 USM table must be organized. Please refer to 5-3-2 Notification –
SNMPv3 USM for more information.
To test SNMPv3 in Linux, launch shell and key in the following command:
VQPSZDON Y  X XVHU! O DXWK3ULY $ SDVV
ZRUG! ; SDVVZRUG! Q FRQWH[W QDPH! W  LS!

-v: 1 for SNMPv1, 3 for SNMPv3.
-l: Follow the security levels. They are: noAuthNoPriv, authNoPriv and authPriv.
-u: The user name which is assigned from SNMPv3 USM table.
Export OpenSSH Key and assign a file name to the
7
7URXEOHVKRRWLQJ
Chapter
Generate
Generate